How to Make Bongs

If you’re looking to get into smoking out of glass pipes and bongs, then this is the post for you! This guide will show you how to make your own bong from scratch, step-by-step. Whether you’re a beginner or a seasoned smoker, we guarantee that this guide will teach you some essential skills you’ll use repeatedly. So let’s get started!

If you’re looking for a fun and easy way to smoke marijuana, then you might want to try making your own bong. It’s really not that difficult, and it can be a great way to get creative with your smoking.

Quick Steps:

Here are some tips on how to make a bong:

1. Choose the right materials. The first thing you need to do is decide what kind of materials you want to use to make your bong. You can use any kind of pipe, glass, or plastic that you have available.
2. Cut the materials. Next, you need to cut the materials to the correct size. You will need to cut the pipe, glass, and plastic to the correct size so that they fit together correctly.
3. Assemble the materials. Now you need to assemble the materials. First, put the pipe into the glass. Next, put the glass onto the plastic. Finally, put the plastic on top of the pipe.
4. Make the hole. The final step is to make the hole in the bottom of the bong. You will need to make a small hole in the bottom of the plastic so that you can smoke from the bong.

Congratulations, you have now made your own bong! and here is guide to know How to use your bong

How to make a bong at home?

If you’re looking for an easy way to make a bong at home, you’ve come to the right place. Here’s how you can make a simple, but effective, bong using only common household items.

Required Materials:

First, gather your materials. You will need:

• A pot or pan large enough to hold the bong
• A funnel
• A small piece of clay or a plastic bottle
• A lighter or a stove
• A pot of water
• A clean piece of cloth

Process to Make Bong At Home:

• Now, begin by filling the pot or pan with water and heating it to a simmer. Once it is hot, add the clay or bottle and let it cool slightly.
• Next, fill the funnel with the hot water and insert it into the top of the pot or pan. Put the lid on the pot or pan and wait until the water reaches a boil.
• Once it does, carefully pour the hot water into the clay or bottle. It is important to be careful not to spill the water, or you will ruin your bong.
• Once the water is completely gone, take the pot or pan off the heat and let it cool. Once it is cool, use the clean cloth to clean it off.

Your bong is now complete! Remember to always use caution when using a bong, and be sure to use safety precautions, such as using a fire extinguisher in case of a fire.

Make a Homemade bong without foil:

Making a homemade bong without foil is a great way to save money and avoid dangerous materials. By using a glass pipe, you can avoid the potential for burns or other injuries if the bong is mishandled.

Steps to Make Bong Without Foil:

There are a few simple steps you need to take in order to make a bong without foil.

1. Gather the necessary materials. You will need a glass pipe, a lighter, and some water.
2. Clean the glass pipe. This is the most important step in making a bong without foil. Make sure that the pipe is free of any obstructions or residue.
3. Cut a piece of foil large enough to cover the entire pipe. If the pipe is round, cut a piece of foil that is the same diameter as the pipe.
4. Place the foil over the pipe. Make sure that the foil is positioned so that it covers the entire pipe.
5. Place the pipe in a heating source, such as a stove or oven.
6. Place the lighter to the foil. The heat from the lighter will cause the foil to start to melt.
7. Allow the foil to melt completely. Once the foil has melted, remove the pipe from the heating source and enjoy your homemade bong without foil!

How to make a homemade bong out of a liquor bottle?

Making your own bong out of a liquor bottle can be a fun and easy project. All you need is a bottle of liquor, some tubing, a pot, and some soap.

• First, cut off the top of the bottle about an inch below the lid. Then cut a length of tubing about six inches long. Next, cut a hole in the side of the pot large enough to fit the tubing. Slide the tubing into the hole in the pot, and then fit the lid of the bottle onto the tubing.
• Next, fill the pot half-full of water and place the bong over the water. Put the pot on the stove and turn it up to medium heat. Once the pot is hot, add the liquor to the bong. Allow the liquor to flow through the tubing and into the pot.
• Once the liquor has been flowing through the tubing for a few minutes, turn off the stove and let the bong cool down. Then, remove the tubing from the pot and enjoy your homemade bong!

How to make a bong out of a whisky bottle?

Making a bong out of a whisky bottle is a fun and easy project that can be done in a few simple steps. All you need is a whisky bottle, some JB Weld, and some construction paper.

• First, cut a hole in the bottom of the whisky bottle using a sharp knife. The hole should be about 2-3 inches wide and 1-1.5 inches deep.
• Next, mix up some JB Weld and pour it into the whisky bottle. Make sure to fill the hole in the bottom of the bottle with the JB Weld mixture.
• Finally, cover the hole in the bottom of the bottle with construction paper. Make sure the construction paper is tight against the bottle and doesn’t move. Let the JB Weld mixture harden overnight.
• When the JB Weld mixture has hardened, you can remove the construction paper and enjoy your brand new bong!

How to make a homemade bong with a hose?

Looking to enjoy your cannabis products in a new way? Why not try making your own bong using a garden hose? This simple project is easy to do and can provide you with a high-quality smoking experience.

Here’s how to make one:

1. Start by removing the water nozzle from the end of the garden hose.
2. Cut off the end of the hose that is not fitted with the nozzle.
3. Bend the cut end of the hose into a “U” shape.
4. Fit the end of the “U” shaped hose into the end of the nozzle on the garden hose.
5. Secure the hose into place by twisting the ends of the “U” shaped hose.
6. Fill the bong with water and allow it to soak.
7. Place the bong on a flat surface and fill it with your desired amount of cannabis.
8. Light the cannabis and allow it to burn for a few minutes.
9. Take the bong off of the flat surface and enjoy your smoking experience.

How to make a homemade bong without tinfoil?

Making a bong without tinfoil is easy if you have the right supplies.

Required Material:

• The first thing you need is a container that will hold the water. You can use a gallon-sized plastic bag, a water bottle, or a pot.
• The next thing you need is some kind of pipe. You can use a clean coffee filter, a metal straw, or a length of pipe.
• The final thing you need is some kind of water filter. You can use a piece of cloth, a coffee filter, or a metal mesh.

Steps to Make Homemade Bong without Tinfoil?

To make the bong,

1. First fill the container with water. You can use any kind of water, but cold water is best. If you are using a water bottle, you will need to cut off the top. If you are using a pot, you will need to cut a hole in the bottom.
2. Next, place the pipe into the water. Make sure the pipe is immersed in the water. You can use a coffee filter, a metal straw, or a length of pipe.
3. Next, place the water filter over the pipe. Make sure the filter is submerged in the water.
4. Finally, place the container on a stable surface and fill it with weed. You can use any kind of weed, but it is best to use high-quality weed.

How to make gravity bongs?

Looking for a fun and easy way to enjoy smoking marijuana? Why not try making your own gravity bongs?

There are many different ways to make gravity bongs, so it is best to consult with a professional if you are not familiar with the process. However, the basic steps are:

1. Choose a glass or plastic pipe that is the right size for your needs.
2. Secure a screen, a percolator, or a water pipe adapter to the top of the pipe.
3. Fill the pipe with water and place it in a safe location.
4. Light the marijuana and place the pipe in the desired position.
5. Wait a few minutes for the pipe to reach the desired smoking temperature.
6. Smoking time is complete when the smoker feels the need to take a breath or when the pipe begins to produce steam.
7. Remove the pipe from the smoking position and enjoy your new gravity bong!
   How to make a gravity bong without tin foil?

Looking to add an extra element of fun to your smoking experience? Gravity bongs are a great way to do just that! These types of bongs use a weighted base to keep the water and smoke in the tube, resulting in a more intense and enjoyable smoking experience.

How to make Gravity Bong without Tinfoil:

However, gravity bongs can be a little tricky to make without the help of tin foil. Here are four tips on how to make a gravity bong without tin foil:

1. Choose a weighted base.

The first step is to choose a weighted base. This can be anything from a rock to a metal ball. The heavier the base, the more gravity the bong will have and the more intense the smoking experience will be.

2. Build a platform.

Next, build a platform around the weighted base. This platform should be tall enough so that the water doesn’t touch the ground and wide enough so that the bong can hold a lot of water.

3. Add a water pipe.

Finally, add a water pipe to the platform. This pipe should be long enough so that the water can flow all the way to the weighted base.

4. Add the tobacco.

Now add your tobacco and light up! The gravity of the weighted base will cause the water and smoke to flow into the tube, giving you the most intense smoking experience possible.

How to make gravity bong hits smoother?

Looking to make gravity bong hits smoother? Here are a few tips to help:

1. Make sure the bong is well-cleaned before use. Dirty bongs will cause more drag on the smoke, making hits harder to achieve.
2. Try using a water pipe cleaner to clean the inside of the bong. This will help to remove any build-up of ash and other material.
3. Use a carb-free smoke mix if you want to make your hits smoother. This will help to reduce the amount of drag on the smoke.
4. Hold the smoke in your lungs as long as possible before releasing it. This will help to reduce the amount of drag on the smoke.
5. Try using a more relaxed grip when smoking. This will help to reduce the amount of drag on the smoke.

How to make a gravity bong out of a glass bottle?

If you’re looking for a fun and easy way to get high, you should try making a gravity bong out of a glass bottle. This device is simple to make and can be used to smoke any type of marijuana. All you need are a glass bottle and some pot.

1. To make a gravity bong out of a glass bottle, start by washing the bottle thoroughly. Make sure to get all of the dirt and dust off of it. Then, cut off the top of the bottle so that it is just below the neck. Next, cut a small hole in the side of the bottle near the top. You can use a hole saw or a sharp knife to do this.
2. Next, put the pot into the bottle. Make sure the pot is fully submerged in the water. Then, screw on the top of the bottle. Be sure to tighten the screw enough so that the bottle is sealed.
3. Now, you’re ready to smoke your marijuana. To do this, simply light the pot and then hold the gravity bong up to your mouth. The smoke will flow into the bottle and then out the hole in the side of the bottle. Be sure to hold the bong close to your mouth to avoid inhaling any of the smoke.

How to make a gravity bong without aluminum?

Are you looking for an alternative to using aluminum gravity bongs? If so, you may be wondering how to make a gravity bong without aluminum.

Fortunately, making a gravity bong without aluminum is possible and can be done with a few simple steps.

• First, you will need to find a way to create a strong, durable base. This can be done by using materials like wood, metal, or plastic. Once you have a good base, you can then create your gravity bong without aluminum.
• To make a gravity bong without aluminum, you will first need to create a water chamber. This can be done by using a glass or plastic container and filling it with water. Next, you will need to create a bowl-like structure out of a material that is strong and durable. This can be done by using a metal or plastic frame and fabricating it to fit your water chamber. Finally, you will need to add water to the bowl-like structure and place the gravity bong on top of it.

By following these simple steps, you can create a gravity bong without aluminum. If you have any questions or need help, don’t hesitate to contact a experts at The Smoke Shop. We would be happy to help you create a gravity bong that you will love!

How to make a gravity bong with a mason jar?

If you’re a fan of smoking weed, then you know that you can’t just go out and buy a fancy bong. You have to make your own! And if you’re looking for a fun and easy project to do, then check out this gravity bong tutorial!

Required Materials:

To make this gravity bong, you’ll need:

• A Mason Jar
• A Drill
• A Hanger
• A Jug of Water
• A Tube of Silicone
• A Small Piece of Glass
• A Knife
• A Torx Bit
• A Sticky Note

Process to make gravity bong with a mason jar:

1. First, you’ll need to drill a hole in the bottom of the Mason Jar. This hole should be big enough for the Hanger to fit through.
2. Next, you’ll need to thread the Jug of Water through the hole in the Mason Jar and hang the Hanger from the Jug. Make sure the Hanger is positioned so that the Glass is touching the Water.
3. Now, you’ll need to drill a hole in the Glass for the Tube of Silicone to fit. Make sure the Tube of Silicone is positioned so that it’s touching the Water.
4. Finally, you’ll need to drill a hole in the top of the Mason Jar for the Torx Bit to fit. Make sure the Torx Bit is positioned so that it’s touching the Silicone.

Now, you’re ready to start smoking! Just light the Weed on fire and then use the Tube of Silicone to suck the Smoke through the Hole in the Glass and into your Lungs!

How to make a gravity bong with a 5 gallon jug?

Looking to add a little bit of fun to your smoking experience? Why not try making a gravity bong using a 5 gallon jug? This simple piece of hardware can provide hours of enjoyable smoking, and is easy to construct.

1. To make a gravity bong using a 5 gallon jug, you will first need to purchase the jug and install a funnel on the top. Next, you will need to cut a hole in the bottom of the jug big enough to fit the neck of the bong.
2. Next, you will need to fasten the neck of the bong to the funnel hole on the jug using a pipe clamp. Be sure to leave enough room at the top of the bong so that you can smoke through the pipe clamp.
3. Finally, you will need to fill the bong with water and attach the mouthpiece. Make sure to adjust the water level so that it covers the bottom of the bong. Once everything is in place, turn the bong on and enjoy your smoking experience!

How to make a gravity bong with a one-hitter?

There’s something undeniably satisfying about sinking a good hit of cannabis into a gravity bong. But making one yourself can be a bit of a challenge. Not to worry, though – we’re here to help!

1. The first thing you’ll need is some cannabis. If you’re using dried cannabis, you’ll need to break it up into small pieces so it will fit in the gravity bong. If you’re using ground cannabis, you’ll just need to mix it with some water until it’s a loose paste.
2. Once you have your cannabis ready, you’ll need to fill the gravity bong with water. Make sure the water level is high enough so the cannabis is submerged, but not so high that it covers the bottom of the gravity bong.
3. Next, light the cannabis. Once it’s burning, start gently adding the cannabis to the top of the gravity bong. As the cannabis goes in, it will start to fall down the gravity bong and into the water.
4. Once all the cannabis has been added, turn the gravity bong on and enjoy! You’ll know you’ve hit your target when the water starts to turn a deep green color.

How to make a glass bong with a torch?

Are you looking for a way to make a glass bong with a torch? If so, you’ve come to the right place!

• First, you will need a glass pipe, a torch, and some sandpaper.
• Next, you will need to remove the glass pipe’s bowl. This can be done by heat-treating the bowl with a torch, or by using a glass bong cleaner. Be sure to wear gloves and eye protection while doing this, as hot glass can cause serious burns.
• Once the bowl has been removed, you will need to sand the pipe down to its original glass thickness. This can be done with sandpaper, or by using a glass pipe grinder.
• Once the pipe has been sanded down, you will need to clean it. To do this, you will need a bowl, water, and a cloth. Wet the cloth and wring it out, then place it over the bowl. Put the pipe in the bowl and using a circular motion, clean the pipe of all debris.
• Finally, you will need to add your preferred smoking material to the pipe. To do this, you will need a torch and some wax or shatter. Place the shatter or wax in the bowl of the pipe, and light it using the torch. Once the wax or shatter has been lit, allow it to burn for a few seconds, then remove it from the pipe.

Now you’re ready to enjoy your new glass bong and here is guide to clean your glass bong

How to make beer bongs?

If you’re looking for a fun and easy way to get your party started, consider making some beer bongs! These handy devices are perfect for getting your party started and ensuring that everyone has a good time.

Required Material:

All you need to make a beer bong is some plastic pipe, some aluminum foil, some beer, and some water.

Steps to make Beer Bong:

To make the beer bong, start by cutting the aluminum foil into a circle that is about 2 inches wide. Next, cut the pipe lengthwise into two equal pieces. Make sure that the end of the pipe that will be attached to the bong is cut at a 90-degree angle.

Now, place one piece of aluminum foil inside the pipe and place the other piece of aluminum foil on top of it. Pour the beer into the pipe until it is full. Carefully place the end of the pipe into the water and hold it there for a few seconds to allow the beer to start flowing into the bong. Once the beer is flowing freely, release the pipe and enjoy your new beer bong!

How to make silicone bongs?

Bongs are an essential piece of smoking gear, and many great options are available on the market. You’ll want to consider making your own if you’re in the market for a high-quality silicone bong.

Making your own silicone bong is a simple process that can be completed with some basic supplies and tools.

Required Materials:

Here’s what you’ll need:

• Silicone material (either purchased or made using simple materials like silicone caulk and boiling water)
• Bowl or pipe
• Glass or metal pipe screen
• Dab tool (optional, but recommended)
• Bowl scraper
• Rubber band
• Alcohol

Once you’ve gathered your supplies, you can begin the process of making your silicone bong.

Steps to Make Silicone Bong:

1. Start by cutting the silicone material to the desired size. You can use a bowl scraper or a knife to cut the silicone, or you can use a silicone caulk gun to seal the edges of the silicone.
2. Next, you’ll need to create a bowl or pipe out of the silicone material. You can do this by cutting a hole in the center of the silicone, or you can use a pipe and screen to create a more intricate design.
3. Once the bowl or pipe is created, you’ll need to add a screen to the top. This can be done by drilling a hole in the top of the bowl or pipe and adding the screen, or you can use a dab tool to create a design on the top of the silicone bowl or pipe.
4. Finally, you’ll need to add a rubber band around the top of the bowl or pipe to keep it in place.

Your silicone bong is now ready to use! Simply fill the bowl or pipe with water, add your favorite smoking materials, and enjoy your high-quality, durable silicone bong.

How to make cool pipes for bongs?

If you’re like most people, you probably think of bongs as glorified water pipes. But there’s a lot more to them than that, and you can make some really cool ones using simple tools and supplies.

Required Materials: 

First, you’ll need some materials. You’ll need a plastic pipe, a drill, a length of pipe-cutting tube, a hacksaw, and a file.

Steps to make:

1. The first thing you’ll want to do is cut the end off of the plastic pipe. This should be about 2 inches long, and it should be slightly wider than the width of the pipe you’re going to use.
2. Next, use the drill to bore a hole in the end of the pipe that you just cut. The hole should be about 1 inch deep, and it should be centered on the end of the pipe.
3. Now, use the hacksaw to cut a length of pipe-cutting tube that’s equal to the width of the pipe. You can cut the tube from a piece of scrap plastic, or you can buy it prepared.
4. After you’ve cut the tube, use the file to smooth the edges of the hole.
5. Finally, fit the pipe-cutting tube into the hole in the end of the plastic pipe, and tighten the nut on the end of the tube so that it’s snug against the pipe.

Now you’re ready to make your bong. Start by pouring some water into the pipe, and then put the bud pipe into the smoke. Once you’re ready to smoke, light the smoker and pull the pipe out of the water.

The smoke will flow through the pipe and into your mouth, and the bong will give you a really smooth, enjoyable smoking experience.

How to make water bongs?

To make a water bong, you will need:

Material Required: 

• A piece of glass or plastic pipe
• A water bottle or container
• A bowl or container
• A funnel
• A rubber band
• An ashtray

Steps to make Water Bong:

1. Cut the pipe into two equal pieces. The shorter piece should be about 8 inches and the longer piece should be about 12 inches.
2. Place the bowl or container on top of the shorter piece of pipe.
3. Fill the bottle or container with water and place it on top of the bowl or container.
4. Thread the funnel through the top of the bottle or container and into the bowl or container.
5. Twist the rubber band around the top of the funnel. This will help to prevent water from leaking from the funnel.
6. Place the ashtray on top of the pipe and hold it in place with your hand.
7. Drag the shorter piece of pipe over the top of the water bottle or container, slowly and steadily.
8. Watch the water flow through the pipe and into the bowl or container. Be careful not to spill any water!
9. Enjoy your water bong!

How to make clay bongs?

For clay bongs, you need some clay, water, and a glass pipe. You can use your previous pipe.

1. First, you need to make two shapes of clay by using a bowl.
2. Next, you need a long pipe and a short pipe. These pipes are used during the construction of clay bongs.
3. You can make these pipes according to your need.
4. Connect the two shapes of clay with each other and add a long pip with a degree of 45 on the upper side.
5. The short pipe will be connected on the side of the final shape of clay with the help of a clue.
6. Wait for some minutes until the clay is dry.
7. Now add a glass pipe with the small pipe and enjoy your bong.

How to make home made water bongs?

Follow these steps to make home made water bongs:

1. First, you’ll need some materials: a plastic bottle, a ruler or a piece of paper, a bowl, and a funnel.
2. To make the water bong, start by measuring the circumference of the plastic bottle. This measurement will be the diameter of the pipe that the water will flow through. Next, mark the bottle’s circumference with a ruler or a piece of paper.
3. Now, cut the bottle along the circumference that you marked. You’ll need to make two cuts, one on top of the other. Be sure to leave a small amount of the bottle’s circumference at the top and bottom of the pipe so that the pipe can fit snugly into the bottle.
4. Now, fit the pipe into the bottom of the bowl and pour water into the bowl until it reaches the top of the pipe. Gently push the pipe up into the water so that the water flows through the pipe.

To use your water bong, fill the bowl with water and place it over your mouth. Smoke will now flow through the pipe and into your mouth. Enjoy!

how to make homemade glass bongs?

Are you looking to roll your own joints but don’t have the time or money to go out and buy a bong? No problem! You can make your own glass bongs with a little bit of ingenuity and some basic supplies.

• First, decide what type of glass you would like to use. You can use any type of glass that is safe to smoke marijuana out of, including wine glasses, beer glasses, and even flower vases. Just be sure to choose a type of glass that is not too thick or too thin, as these types of glasses can cause bubbling and heat problems when using them to smoke weed.
• Next, you will need some supplies to make your glass bong. You will need a pot, some hot glue, and some glass tubing. If you are using a wine glass, you will also need a cork.
• To make the bong, start by heating up the pot until it is hot. Then, carefully pour the weed into the pot, making sure not to burn yourself. Once the weed is in the pot, place the glass tube over the top of the pot and let the hot glue attach the tube to the pot. Once the glue is dry, use a cork to cover the top of the glass tube.

Now, you are ready to smoke your weed out of your new glass bong! Simply light up your joint and take a nice long drag from the bong. Be sure to watch your glass bong carefully, as it can be difficult to keep it clean. If you start to see any smoke coming out of the tube, simply remove the tube from the pot and clean it off with hot water. Then, reattach the tube to the pot and keep on smoking!

how to make bongs out of alcohol bottles?

Follow these steps to make a bong with alcohol bottles:

1. First, you will need some alcohol bottles. You can use any type of bottle that you have on hand, but we recommend using wine or liquor bottles because they are thicker and will hold more water. Make sure to get at least two bottles – one for the water chamber and one for the tobacco chamber.
2. Next, you will need some tubing. You can buy tubing pre-made or you can make your own using a water pipe adapter and some copper wire. We recommend using copper wire because it is more durable and will not rust.
3. Now that you have your tubing and bottles, it is time to assemble your bong. Start by placing the water chamber inside the bottle. Make sure to fit the bottle snugly so that the water chamber is tight against the bottle’s surface.
4. Next, fit the tobacco chamber over the water chamber. Be sure to fit it tightly so that the tobacco chamber is against the bottle’s surface.
5. Now, fit the tubing over the tobacco chamber and water chamber. Make sure to fit the tubing snugly so that the water chamber and tobacco chamber are held firmly against each other.
6. Finally, fit the mouthpiece onto the tubing and attach it to the bottle’s lid. Be sure to tighten the lid securely to ensure that the bong is watertight.

How to make bongs out of vases?

What if you could smoke weed without having to buy an expensive bong? Well, you can make a bong out of any vase! This is a great way to save money and still get the smoking experience you desire. Here is how to do it:

1. Choose a vase that you want to use as your bong. It should be big enough to hold your smoking materials, but not so big that it takes up a lot of space.
2. Cut a hole in the bottom of the vase. The hole should be about 2 inches in diameter.
3. Place your smoking materials in the hole in the vase.
4. Put the vase on a sturdy stand so that it is upright.
5. Smoke your weed using the bong as you would any other bong.

Frequently Asked Questions (FAQs):

How to make bongs taste good?

If you’re looking for a way to up your smoking game, you should consider trying out bongs. Not only are they a fun way to get high, but they can also make your smoking experience much more enjoyable.

Here are a few tips on how to make bongs taste good:

1. Use quality water.

If you want your bongs to taste good, you need to use quality water. If you’re using tap water, you might want to try using a water filtration system. This will help to remove any impurities that might be making your bongs taste bad.

2. Use quality tubing.

Another factor that can affect the taste of your bongs is the tubing that you use. Make sure that you get quality tubing, and avoid using cheap materials. This will not only affect the quality of the smoke that you’re getting, but it will also affect the durability of your bong.

3. Use quality e-juice.

If you want your bongs to taste good, you need to use quality e-juice. This is especially important if you’re using sub-ohm vaping gear. If you use low-quality e-juice, your bongs will likely not function as well.

4. Use a water filtration system.

If you want to make sure that your bongs always taste good, you should consider using a water filtration system. This will help to remove any impurities that might be making your smoking experience unpleasant.

Overall, making your bongs taste good is a simple task that can be accomplished with a little bit of effort. By using quality water, tubing, and e-juice, you can ensure that your bongs always deliver a great smoking experience.

How to make bong hits less harsh?

Making bong hits less harsh is a simple process that can easily be accomplished by following these simple tips.

1. Use a flat surface to roll your joint.
2. Avoid using too much pressure when smoking your joint.
3. Slow down and take your time when smoking your joint.
4. Avoid packing your joint too tightly.

These simple tips will help make your joint hits smoother and less harsh. By following these tips, you will be able to enjoy your bong hits without feeling the harshness that can come with smoking them.

How to make bong not smell?

If you’re like most people, you love the smell of weed. But what if you don’t want your bong to smell? There are a few things you can do to make sure your bong doesn’t smell.

• First, make sure you’re cleaning your bong regularly. You can use a cleaning solution or a pipe cleaner to clean it. Just be sure to clean all the pieces of the bong, including the inside and the lid.
• Second, make sure you’re not using too much weed. If you’re using too much weed, it will smell bad and your bong will likely start to rust. Instead, try using a lower dose of weed and see how you like it. If you still don’t like the smell, you can try using a different bong.
• Last, be sure to keep your bong dry. If it gets wet, the weed will start to smell and the bong will likely start to rust. Instead, keep your bong dry by storing it in a dry place.

How to make bong water taste better?

Bong water is one of the most commonly consumed forms of cannabis, but many people are not familiar with how to make it taste better. There are a few things that you can do to make your bong water taste better, and they all depend on what type of bong you are using.

• If you are using a glass bong, you can add ice to it. This will help to cool the water and make it more refreshing. You can also add some flavoring to the water to make it taste better. Some people like to add citrus fruits, like oranges or lemons, while others prefer to add herbs, like mint or sage.
• If you are using a metal bong, you can add water to the bong and then heat it up. This will make the water more hot and stronger. You can also add ice to the bong to help cool it down and make it more refreshing. You can also add flavoring to the water to make it taste better. Some people like to add citrus fruits, like oranges or lemons, while others prefer to add herbs, like mint or sage.

How to make bong rips taste better?

Some ways to make bong rips taste better are to add flavoring, using a water pipe that is specifically made for bong rips, or using a bong that has a percolator.

How to make bong water smell better?

There is no surefire way to make bong water smell better, but many people swear by using a piece of fruit or vegetables to steep in the water before smoking. Others recommend soaking some tobacco leaf in the water for a more intense smell.